Key Features

• 1200 LEDs across two white channels – 3000 K warm white and 6500 K daylight white, each carried at full density along the entire 10 metre run.
• Largest coverage in the white range – One kit lights a complete garden perimeter, long driveway, or terrace boundary with switchable colour temperature throughout.
• 26700 / 4000 mAh battery – Sized for the 5 W load of a 1200-LED strip, supporting a full overnight cycle after a day of solar charging.
• RF remote at 10–20 metres – Switch channels and brightness from anywhere along the run; no line of sight needed, unaffected by dust or obstructions.
• 450 lm high / 190 lm low – Two brightness levels per channel, letting the user trade output against runtime on shorter winter charging days.
• Detachable adjustable ground spike – Angle the panel to peak sun, detach for cleaning and off-season storage.
• IP65 brushed PVC extrusion – W12.5 × H7.0 ± 0.5 mm, rated -25 °C to +45 °C for year-round outdoor deployment.
• Shared accessories across the series – Identical strip profile and mounting hardware to the 5 metre models, simplifying spare-part stockholding.

Specifications

Materials & Finish

• Strip housing: brushed-finish PVC extrusion, W12.5 × H7.0 ± 0.5 mm, flexible enough to follow fence lines and curved bed edges over a 10 metre run.
• LED layout: 1200 pcs 2835 packages arranged as two independent white channels at 3000 K and 6500 K.
• Ingress protection: IP65 across the strip body and the docking joint.
• Battery cell: 26700 lithium cell, 4000 mAh at 3.2 V, matched to the 5 W rated load.
• Thermal range: -25 °C to +45 °C operating, -20 °C to +45 °C storage, 10–90% relative humidity.
• Photometric stability: L70B20 at 20,000 hours; SDCM ≤ 7 maintains colour consistency along the full length and between the two channels.
• Mechanical endurance: 15,000 switching cycles, MTBF 20,000 hours.

Assembly & Installation

Tools needed: screwdriver, and a drill if fixing clips to masonry or hard fencing.

Steps:

1. Walk the intended route and confirm it stays within 10 metres before fixing anything.
2. Position the solar panel at the point of longest daylight exposure — this determines nightly runtime for the whole run.
3. Insert the ground spike into soil, or use the hanging fixture on a wall, fence, or railing.
4. Angle the panel toward peak sun.
5. Fix the strip every 500–600 mm with the supplied clips, screws, and expansion bolts.
6. Connect the strip to the solar control unit via the keyed docking connector.
7. Pair the RF remote, then test both colour channels from the far end of the run.

Practical note: on a 10 metre dual-channel run, consistent clip spacing matters more than on shorter kits — uneven support produces visible sag and an irregular light line along the boundary.

Applications

• Complete garden perimeters – Full boundary coverage with switchable colour temperature from a single control unit.
• Driveways and long access paths – Daylight white for arrival and safety, warm white for evening ambience.
• Large terraces, decking, and pergolas – One installation serving both dining ambience and functional task light.
• Hospitality outdoor areas – Garden bars, restaurant terraces, and event lawns adjusting light character between service periods.
• Boundary fencing and railings – Extended linear runs where a single wired circuit would require trenching and an electrician.

Customization

Certifications

• CE
• CB
• RoHS
• Test reports available on request

Packing & Logistics

• Packing type: colour box + carton
• Packing quantity: 20 SET per carton
• Inner box dimensions: L235 × W205 × H105 mm
• Inner box weight: 1500 g
• Carton dimensions: L550 × W490 × H430 mm
• Accessories included: fixed clip, screw, expansion bolt
• MOQ: 50 sets
• Lead time: 15–21 days
• Port of loading: Guangzhou / Shenzhen

Service

• Warranty: 2 years
• Samples: free samples on standard items; freight collect
• Response time: within 2 hours
• After-sales: technical support by email or phone throughout the warranty period. Report quality issues with photographs, video, and the item number; verified defects are resolved by replacement parts or replacement units shipped with your next order, or by credit where no follow-up order is scheduled. Faults caused by physical damage, unauthorised modification, or use outside the rated environmental conditions fall outside warranty cover.
• Contact: tel: +86 18933392222 | email: [email protected] | www.joineonlux.com

FAQ

Q: How does the 10 metre dual white kit differ from the 5 metre version?
A: Length and capacity. This model runs 1200 LEDs over 10 metres at 5 W with a 26700 / 4000 mAh battery, against 600 LEDs over 5 metres at 2 W with an 18650 / 1800 mAh cell. Both offer the same 3000 K and 6500 K switchable channels and the same RF remote.

Q: Can the two white channels be used at once?
A: The kit is built for switching between 3000 K warm white and 6500 K daylight white rather than blending them. Select the channel that suits the moment.

Q: Is 1200 LEDs across 10 metres the same density as the 5 metre kit?
A: Yes — both run at the same LEDs-per-metre density. The 10 metre model simply covers twice the distance, which is why it needs the larger battery and the higher 5 W rating.

Q: Does the kit need mains power or an electrician?
A: No. Charging is entirely solar into the integrated battery, and the strip switches on automatically at dusk. There is no wiring, no trenching, and no running cost.

Q: What happens on consecutive overcast days?
A: Runtime depends on stored charge. Using the low brightness mode at 190 lm / 2 W conserves the battery and extends operating hours when charging conditions are poor.

Q: What are the MOQ, lead time, and port of loading?
A: MOQ is 50 sets, lead time 15–21 days, shipping from Guangzhou or Shenzhen. Each carton holds 20 sets.